LANXESS certified values for the carbon footprint of the base resins

The specialty chemicals company LANXESS is one of the world’s first plastics manufacturers to offer its customers – processors of its Durethan polyamides and Pocan polyesters (PBT) – certified values for the carbon footprint of the base resins, said the company.

Certification was done by an accredited verification body and includes not only the polyamide 6 precursor caprolactam but also the glass fibers manufactured by LANXESS in Antwerp. Glass fibers are used for reinforcing plastics if necessary.

“These certified values enable our customers to more accurately estimate the climate-friendliness of their products and identify ways of further reducing their CO2 emissions,” says Guenter Margraf, Head of Sustainability and Product Management in the High Performance Materials business unit. “The values are also an important part of life cycle analyses, which are increasingly being used in the automotive and electrical and electronics industry to systematically analyze how products impact the environment from manufacturing through to disposal.”

The values were calculated according to the standard ISO 14067:2018 for the carbon footprint of products. The analysis factored in all the major emissions that occur up to the point at which the product leaves the LANXESS factory gate (cradle-to-gate). These include not only direct emissions (scope 1) but also indirect emissions from the purchase of energy (scope 2) as well as the emissions that occur in the upstream supply chain, for example those associated with the raw materials used and transportation processes (scope 3).

“We were especially pleased to learn that, with 3.66 metric tons of CO2 equivalents emitted per metric ton of polyamide 6 produced, the carbon footprint of our polyamide 6 base resin is much smaller than the current published European industry average,” says Margraf. One reason for this is that LANXESS synthesizes the plastic in a highly integrated plant network at its Antwerp site. From 2024 onward, the carbon footprint of polyamide 6 production is set to improve significantly yet again when, in 2023, if all goes to schedule, LANXESS will be opening a second nitrous oxide reduction facility in Antwerp. “Reducing nitrous oxide cuts the direct emissions associated with polyamide 6 production by almost 90%,” says Margraf. LANXESS is also looking to use sustainable raw material sources for Caprolactam with a view to reducing the carbon footprint of its polyamide 6 to less than three metric tons of CO2 equivalents. The certification also revealed that the carbon footprint of the PBT base resin from LANXESS was less than that of many other manufacturers.

In glass fiber production, LANXESS also has a significantly smaller carbon footprint compared with most of its competitors. “This applies in particular to our resource-efficient Eco glass fibers, which, with a carbon footprint of 0.4 metric tons of CO2 equivalents per metric ton of glass fiber, save more than 70% of emissions compared with the published industry average. We use industrial glass waste in our production, which reduces the consumption of raw materials and energy and avoids waste,” says Margraf.

LANXESS is looking to use the certified carbon footprints for identifying ways to reduce the level of greenhouse gases emitted during plastic production. One focus is on the use of sustainable raw materials due to the significant leverage effect that can be achieved here. New product ranges such as Durethan Blue, Durethan Eco or Pocan Eco are currently being extended that contain a significant proportion of circular (recycled or bio-based) raw materials or have a carbon footprint that is considerably smaller than conventional products. The sustainable origin of those raw materials is certified according to the ISCC Plus standard (“International Sustainability and Carbon Certification”). The certification is coupled with mass balancing, which allows the share of sustainable material in the end product to be determined and subsequently indicated in a transparent manner for processors. One product example is the 60%-glass-fiber-reinforced Durethan BLUEBKV60H2.0EF. In this polyamide 6 compound, 92% of the raw materials have been replaced by sustainable alternatives.

LANXESS is now planning to calculate the carbon footprint associated with the compounding of polyamide and PBT (engineering plastics). “We are collaborating closely with our suppliers to not only calculate the carbon footprints of the different compounding raw materials but also leverage further potential for cutting emissions,” says Margraf.

The certified carbon footprint as well as the mass-balanced Eco and Blue product ranges will take center stage for LANXESS at the plastics trade show K 2022 in October (booth C76 - C78 in Hall 6).

In August 2022, the specialty chemicals company announced its mission to make its upstream and downstream supply chains climate-neutral by 2050. This encompasses indirect emissions associated with purchased raw materials in particular, but also emissions associated with its logistics processes and end products. By 2030, the aim is to cut scope 3 emissions by 40% compared with the reference year 2015. For direct emissions in production (scope 1) and energy sources (scope 2), LANXESS announced three years ago its intention to achieve climate neutrality by 2040. The renowned Science Based Targets initiative has validated these targets and confirmed that LANXESS is doing its bit to limit global warming to no more than 1.5 °C.

As per MRC, LANXESS said it was suspending its business activities in Russia due to the war in Ukraine. Thus, the company had “suspended business activities with Russian customers as far as contractually possible until further notice” and had suspended all investments in Russia. Its sales in Russia and Ukraine made up less than 1% of its global sales, it said.

LANXESS is a leading specialty chemicals company with about 19,200 employees in 25 countries. The company is currently represented at 74 production sites worldwide. The core business of LANXESS is the development, manufacturing and marketing of chemical intermediates, additives, specialty chemicals and plastics. Through Arlanxeo, the joint venture with Saudi Aramco, Lanxess is also a leading supplier of synthetic rubber.
mrchub.com

Swiss polymer distributor Meraxis acquires French Fournier Plastics Group. The corresponding contracts were signed today in Berne. Subject to antitrust reviews, the purchase is expected to be completed before the end of 2022, said the company.

Fournier is one of the leading distributors of standard and engineering polymers as well as additives in Western Europe and North Africa. With this acquisition, Meraxis is expanding its business regionally and extending its product and service portfolio.

"With the acquisition of Fournier Plastics Group, we are strengthening our geographic footprint in important key markets,” emphasized Dr. Stefan Girschik, CEO of Meraxis.

"Together with Fournier and their partners, we can also offer a much broader product portfolio. Not only for standard polymers and additives, but especially in the engineering polymers segment. Added to this is an expanded service offering in supply chain management, research and development, and digitalization, which fits perfectly into our strategy.” Fournier specializes in engineering plastics, among other things, and thus serves various industrial sectors. Today's Fournier Plastics Group was formed 2016 from the acquisition of the Dutch Prime Polymers by the French Fournier SAS and was complemented in 2019 by the takeover of parts of the Iberian Chemieuro Group.

As per MRC, MOL (Budapest, Hungary) says it has agreed to partner with polymer distributor Meraxis (Bern, Switzerland) for the development and production of recycled polyolefin compounds. The companies have signed a letter of intent to cooperate on the development of a new product portfolio, with Meraxis to supply MOL with post-consumer recyclate to be blended with MOL’s virgin polyolefin resins.

The French company founded in 1972, with headquarters in Saint-Priest (Lyon), has branches in 9 countries in Europe and 3 in North Africa. Fournier’s more than 1,200 customers, most of whom have been with the company for a number of years, include plastics processors from a wide range of industries, such as automotive and packaging.

mrchub.com

China may tweak a proposed sharp increase in refined fuel export quotas for this year by extending the plan into next year, as it weighs the benefits to the economy of higher exports against low domestic stocks and operational challenges, four sources told Reuters.

However, the four sources with direct knowledge of the matter - and three others - said the government was still reviewing the matter. The market has been widely expecting China to release a fifth batch of fuel export quota of up to 15 MMt for the rest of the year, which would be its largest so far in 2022 and lift China's sagging exports.

The proposal from refiners' planning departments, following a government call to boost trade, has led some refiners to ready an increase in output to take advantage of the quota. However, the four sources said Beijing might extend the duration of the proposed volume of 15 MMt into next year to cushion its impact on global markets and avoid a price crash.

The National Development and Reform Commission, China's powerful economic planner, was hosting a meeting with the nation's major oil refiners earlier on Wednesday, the sources said. It was not immediately clear if the meeting reached a decision. The meeting reviewed companies' oil trading activities and their production capacities this year and also discussed the global oil market outlook for 2023, the four sources said.

"The government believes that domestic refiners were operating at low levels this year due to weak domestic demand and negative impact of COVID controls," said one of the sources. "Raising the quotas could help boost overall exports and also help refiners to raise runs," this person added.

Global oil markets have been supported by a sharp reduction in Chinese fuel exports for most of this year. However, the proposed large volume of export quotas caused Asian refiners' margins for diesel, jet fuel and gasoline to slump two weeks ago, although middle distillates products have recovered somewhat.

The proposed volume would mean a 63% jump from the 24 MMt released so far for 2022, too large to be practical and risk crashing refiners' margins, said officials at state refiners. "This rumored size is simply not feasible," said a Beijing-based state oil official involved in refinery production planning.

"Refiners need two to three months to procure the crude oil so you may end up missing the most opportune window for exports," the official said, adding his company's inventories of crude oil and refined products were at levels "lower than normal".

The sources declined to be named as they're not authorized to speak to the press. China's Ministry of Commerce and the NDRC did not immediately respond to requests for comment. The quotas are typically allocated to China National Petroleum Corp, China Petrochemical Corp, China National Offshore Oil Company, Sinochem Group, China National Aviation Fuel Company and private refiner Zhejiang Petrochemical Corp.

We remind, Johnson Matthey (JM), and Dow announced Anqing Shuguang Petrochemical Oxo Co., Ltd. (Anqing), has licensed LP Oxo Technology to produce approximately 200 kta 2-ethylhexanol and 25 kta iso-butyraldehdye. This licence, the second LP Oxo? Licence for Anqing and the 23rd licence of LP Oxo? Technology served in China, will support expanding Anqing's oxo business in the growing oxo alcohols' market. The plant is expected to come online in 2024. Anqing first started operating LP Oxo? Technology in 2016 to produce 100kta 2-ethylhexanol, 115 kta nomal butanol and 23 kta iso butanol.
mrchub.com

bp laid off most contractors at the approximately 160,000 barrel-per-day Toledo, Ohio, refinery it owns with Cenovus Energy Inc, according to sources familiar with the matter, indicating that the plant will experience a prolonged shutdown following last week's explosion and fire, said Reuters.

The explosion killed two United Steelworkers members, identified as brothers Max and Ben Morrissey. The more than 100-year-old refinery has been offline since the middle of last week following the explosion and could be shut for several months.

At least one contracting company is on site assessing the damage. The U.S. Chemical Safety Board is also investigating the incident, which it said additionally caused the release of sulfur dioxide and hydrogen sulfide and significant property damage.


Cenovus has referred comment to BP, which has declined to comment further. The outage caused Chicago gasoline cash differentials to reach new highs on Wednesday. Chicago CBOB gasoline gained 7.75 cents, trading 80 cents per gallon above futures on the New York Mercantile Exchange, traders said, more than 700% higher than prices were a year ago.

The official cause of the explosion has not been reported. Leaking fumes from a crude unit may have caused the ignition in another unit at the facility, a source told Reuters. Multiple units were engulfed in flames, the source said.

Workers finished a maintenance turnaround at the facility in recent weeks and the plant had resumed operating. In August, Cenovus said it would buy the remaining 50% stake it does not already own in the BP-Husky Toledo Refinery. The deal is expected to close by the end of 2022.

In 2008, Husky Energy Inc formed a joint venture with BP by acquiring a 50% stake in the Toledo refinery. The stake then moved to Calgary-based Cenovus when it combined with Husky in 2021.

We remind, BP Plc restarted the largest crude distillation unit (CDU) at its 435,000 bpd Whiting, Indiana, refinery.
BP restarted the 250,000-bpd Pipestill 12 CDU as part of restoring production at the Whiting refinery following an Aug. 24 fire, which idled key utilities forcing the entire plant to shut down.
mrchub.com

Trinseo, a specialty material solutions provider, announced it has initiated an information and consultation process with the Works Council of Trinseo Deutschland GmbH regarding the potential closure of its styrene monomer production site in Boehlen, Germany, said the company.

The facility, which has a nameplate annual capacity of 300 kilotons, generated negative profitability of approximately USD30 million over the last four quarters ending Q2 2022.

Frank Bozich, President and Chief Executive Officer of Trinseo, commented, “Given the current economic outlook of higher inflation, lower customer demand and elevated energy costs, we are evaluating asset optimization across our portfolio."

Bozich continued, “The cost position of the Boehlen facility is challenged due to the current energy cost environment in Europe as well as the facility’s smaller scale, and it’s difficult to envision significant earnings improvement at the site in the near to medium term. Therefore, we have decided to evaluate the potential closure of this plant. In addition to improved profitability for Trinseo, we believe a closure will aid in achieving our 2030 sustainability goals, as Boehlen is one of our most carbon intensive plants."

We remind, Trinseo announced that it has appointed Han Hendriks to the newly created role of Chief Technology Officer (CTO), effective Oct. 1, 2022. As CTO, Hendriks will be a member of Trinseo’s executive leadership team and will be based in The Netherlands. In this role, he will drive the development of differentiated technology and innovation, allowing Trinseo to meet unfilled and unrecognized customer needs and develop sustainable solutions across Trinseo’s innovation pillars.

Trinseo a specialty material solutions provider, partners with companies to bring ideas to life in an imaginative, smart, and sustainability-focused manner by combining its premier expertise, forward-looking innovations and best-in-class materials to unlock value for companies and consumers. From design to manufacturing, Trinseo taps into decades of experience in diverse material solutions to address customers’ unique challenges in a wide range of industries, including consumer goods, mobility, building and construction, and medical. Trinseo’s approximately 3,400 employees bring endless creativity to reimagining the possibilities with clients all over the world from the company’s locations in North America, Europe, and Asia Pacific. Trinseo reported net sales of approximately USD4.8 bn in 2021.
mrchub.com