Oriental Energy once again selects Grace’s UNIPOL PP technology

Oriental Energy once again selects Grace’s UNIPOL PP technology

MOSCOW (MRC) -- W. R. Grace & Co., the leading independent supplier of polyolefin catalyst technology, polypropylene (PP) process technology, and technology services, has licensed its UNIPOL PP process technology to Oriental Energy for its Maoming, China, plant, said Hydrocarbonprocessing.

This is Oriental Energy’s fifth PP line, and its fourth using Grace’s UNIPOL PP process technology with a production capacity of 400 KTA. Laura Schwinn, President of Grace’s Specialty Catalysts business said, “We are extremely pleased that Oriental Energy has chosen our UNIPOL PP process technology once again for its newest polypropylene line in Maoming. Our continuous cooperation over the last ten years has created a solid and lasting relationship between our businesses, and we are excited to watch Oriental Energy achieve their goal of becoming one of the top polypropylene producers in the world using our technology."

Mr. Wu, Yinlong, General Manager of Oriental Energy, commented, “We selected Grace’s UNIPOL PP process for our site in Maoming because of our confidence in the technology. We know from experience with our other UNIPOL PP lines that we can produce the advanced polypropylene resins we need for our customers. We also know Grace will be a trusted advisor to provide support and service for the life of our plants."

Oriental Energy currently has the largest UNIPOL PP operating capacity in China, and there are plans to build additional PP lines at their sites in Ningbo and Maoming in the years to come. UNIPOL PP technology provides licensees with a competitive advantage, allowing them to successfully participate in today’s highly competitive global PP market. The UNIPOL PP technology family, with over 100 reactor lines licensed worldwide, manufacture the broadest range of PP homopolymers, random copolymers and impact copolymers in the industry with a choice of close to 300 standard grades.

Earlier it was reported that Oriental Energy-Ningbo, a subsidiary of a major producer of petrochemical products in the country - Oriental Energy, on September 28 unscheduled production at the polypropylene (PP) plant No. 1 in Ningbo (Ningbo, Zhejiang province, China) due to the policy of dual control of energy consumption in the region. The timing of restarting this enterprise with a capacity of 400 thousand tons of PP per year has not been reported.

According to MRC's ScanPlast report, Russia's estimated PE consumption totalled 1,868,160 tonnes in the first nine months of 2021, up by 18% year on year. Shipments of all grades of ethylene polymers increased. At the same time, PP shipments to the Russian market were 1,138,510 tonnes in January-September 2021, up by 30% year on year. Supply of propylene homopolymer (homopolymer PP) and block-copolymers of propylene (PP block copolymers) increased, whereas supply of injection moulding statistical copolymers of propylene (PP random copolymers) decreased significantly.

Oriental Energy operates two subsidiaries, Oriental Energy-Ningbo and Oriental Energy-Zhangjiagang, each of which, in turn, operates a plant with a capacity of 400 ktpa PP and a propane dehydrogenation unit with a capacity of 600 ktpa. These companies were renamed in April 2017 as follows: Ningbo Fuji Petrochemical was renamed Oriental Energy-Ningbo and Zhangjiagang Yangzijiang Petrochemical was renamed Oriental Energy-Zhangjiagang.
MRC

Mammoet continues providing services for building Barmer oil refinery and petrochemical complex in Rajasthan, India

Mammoet continues providing services for building Barmer oil refinery and petrochemical complex in Rajasthan, India

MOSCOW (MRC) -- Mammoet continues to provide client L&T Hydrocarbon Engineering with heavy lifting services for the construction of its Barmer oil refinery and petrochemical complex in Rajasthan, India, according to Hydrocarbonprocessing.

Mammoet and L&T have a long-term relationship, dating back to 2012, which saw Mammoet lift a 750t chemical reactor with the in-house designed PTC35-DS 1600te ring crane. The most recent project completed was at Paradip refinery earlier this year where Mammoet lifted modules using PT 50 ring crane.

For this latest partnership, Mammoet will be utilizing PTC ring cranes to lift and install a range of modules at HPCL Rajasthan Refinery Ltd. The lifting works are expected to start taking place on site in the middle of 2022.

Specifically, two ring cranes will be employed: the PT50 ring crane will lift and install reactors, regenerators and fractionators, while the PTC35-DS will lift and install a 127m long C3 rectifier (in three parts) and a quench water tower.

The ring cranes will allow L&T to install the reactors and regenerators in just two sections, instead of four sections if a conventional crawler crane is used. The PTC35-DS will prevent unnecessary sectioning and lifting of the equipment into five parts. Therefore, there will be a reduction in total lead time and overall cost savings for the customer.

The Barmer refinery and petrochemical complex is developed for the production of cleaner fuels and is the first of its kind in Rajasthan. Once completed, it will have a total processing capacity of nine MM metric tpy. Expected to be in production by end of 2023, the development is also expected to create approximately 1,500 direct jobs and contribute to Rajasthan’s economic development.

As MRC informed previously, tasked by company Grupa Azoty ((Tarnow, Poland), one of the main players on the European fertilizer and chemical market, Mammoet has recently completed the first scope of work that will lead to the construction of the propane dehydrogenation and polypropylene (PDH/PP) blocks of its client’s chemical facility. The project took place in the town of Police, in the northwest of Poland, and involved the lifting and transport of more than 480 items from a small port to the construction site six kilometers away.

According to MRC's ScanPlast report, PP shipments to the Russian market were 1,138,510 tonnes in January-September 2021, up by 30% year on year. Supply of propylene homopolymer (homopolymer PP) and block-copolymers of propylene (PP block copolymers) increased, whereas supply of injection moulding statistical copolymers of propylene (PP random copolymers) decreased significantly.
MRC

ExxonMobil plans net-zero emissions by 2030 target in Permian Basin operations

ExxonMobil plans net-zero emissions by 2030 target in Permian Basin operations

MOSCOW (MRC) -- ExxonMobil on Monday announced a plan to reduce greenhouse gas (GHG) emissions from its operations to reach net-zero emissions by 2030 in its Permian Basin operations, said the company.

The company will eliminate routine flaring in the Permian Basin by the end of 2022, invest in electrification of operations in New Mexico and Texas to include low-carbon power sources and accelerate its methane-monitoring system to reduce flaring. The company plans to reduce Permian Basin flaring volumes by more than 75%, compared with 2019 flaring volumes, by the end of 2021. And this year, the company is expected to show a reduction of about 15-20% in GHG intensity from upstream operations, compared with 2016 levels.

The Permian Basin operations account for more than 40% of the company’s US net production, producing an average of 500,000 barrels of oil equivalent/day (boe/day). ExxonMobil plans to reduce carbon dioxide (CO2) intensity across its businesses by deploying technology that the company said is “foundational”.

To achieve GHG emission-reduction efforts, ExxonMobil will continue investments in methane mitigation and detection technology, upgrading equipment and employing emissions-offset technology. The company plans to use low-carbon power to electrify its operations, which may include wind, solar, hydrogen and natural gas with carbon capture and storage (CCS). It will also use methane-detection programmes utilising satellite surveillance and a network of ground-based sensors for continuous monitoring and aerial flyovers.

As per MRC, ExxonMobil Chemical has acquired California-based Materia for an undisclosed sum. Materia makes thermoset resins based on dicyclopentadiene (DCPD). They are designed to be alternatives to epoxy resins, vinyl ester resins and unsaturated polyester resins (UPR). The materials can be used in a number of applications, including wind turbine blades, electric vehicle parts, sustainable construction, and anticorrosive coatings.

ExxonMobil and SABIC have announced that their joint venture, Gulf Coast Growth Ventures located near Corpus Christi, Texas, has reached mechanical completion of a monoethylene glycol (MEG) unit and two polyethylene (PE) units. Project startup is expected to begin ahead of schedule, likely in the fourth quarter of 2021.

According to MRC's ScanPlast report, Russia's estimated PE consumption totalled 1,868,160 tonnes in the first nine months of 2021, up by 18% year on year. Shipments of all grades of ethylene polymers increased. At the same time, PP shipments to the Russian market were 1,138,510 tonnes in January-September 2021, up by 30% year on year. Supply of propylene homopolymer (homopolymer PP) and block-copolymers of propylene (PP block copolymers) increased, whereas supply of injection moulding statistical copolymers of propylene (PP random copolymers) decreased significantly.

ExxonMobil is the largest non-government owned company in the energy industry and produces about 3% of the world's oil and about 2% of the world's energy.
MRC

Petro Rabigh plans capital reduction

Petro Rabigh plans capital reduction

MOSCOW (MRC) -- Rabigh Refining and Petrochemical Co (Petro Rabigh) plans a Saudi riyal (SR) 1.21bn (USD321m) capital reduction, followed by a rights issue of up to SR7.95bn (USD2.12bn), said Argaam.

“The purpose of this Petro Rabigh capital reduction and capital increase is to eliminate the accumulated losses incurred due to the large deficit in FYfiscal year 2020 and strengthen Petro Rabigh’s financial position,” Japan’s Sumitomo Chemical said in a statement.

Petro Rabigh is a joint venture between Saudi Aramco and Sumitomo Chemical - each with a 37.5% stake in the company, while the remaining 25% is held by Saudi investors. The planned twin exercise is still subject to regulatory approvals.

Under the plan, about 120.5m Petro RaUSDigh shares will be cancelled, bringing the total down to 755.5m shares after the reduction. The rights issue of up to $2.12bn will be done soon after the capital reduction, with both Saudi Aramco and Sumitomo Chemical chipping in USD795m, equivalent to their respective stakes in Petro Rabigh.

Petro Rabigh’s financial performance in the current fiscal year “continues to be healthy to date due to its stable operations and improvements in market conditions, such as prices for crude oil and petrochemical products”, the Japanese shareholder said. In the third quarter of 2021, the Saudi manufacturer of refined petroleum products and petrochemicals swung into a net profit of SR221m on the back of improved product margins.

Petro Rabigh posted a nine-month net profit of SR1.59bn, compared with the SR3.85bn loss recorded in the same period last year. In October 2020, Sumitomo Chemical and Saudi Aramco jointly loaned out a total of $2bn to Petro Rabigh, which faced shortfall of working capital following a deterioration in the market environment since end-2019 amid the coronavirus pandemic.

As per MRC, Saudi Arabia’s Rabigh Refining and Petrochemical Co (PetroRabigh) has no overhaul schedule for its polypropylene (PP) plant at the moment. The company operates two lines at this plant, which can produce 350,000 mt/year of PP each.

As MRC wrote previously, the company conducted a 55-day scheduled turnaround at its PP units in Rabigh since end-February 2020. Besides, the company has a 300,000 mt/year high density polyethylene (HDPE) unit, a 160,000 mt/year low density polyethylene (LDPE) unit and a 600,000 mt/year linear low density polyethylene (LLDPE) plant at the same site.

PetroRabigh, a joint venture between Saudi Aramco and Japan's Sumitomo Chemical, has an annual output capacity of 18 million tonnes of refined products and 2.4 million tonnes of petrochemicals. Thus, the complex currently has a cracker to produce 1.6-million t/y of ethylene, as well as downstream production of polyethylene, polypropylene, propylene oxide, ethylene glycol and butene-1.
MRC

SIBUR maintains high CDP scores in 2021

MOSCOW (MRC) -- On 7 December 2021, Carbon Disclosure Project (CDP) published its A List of environmental leaders. Over 13,000 companies from all over the world disclosed through CDP and were scored. In 2021, SIBUR kept its B score (management level), which is above the global average, as per the company's press release.

The company also ranked top in climate change retaining the A score (leadership level) and outperforming the industry average.

An important factor that helped SIBUR remain among the world’s above-average players was an improved score for climate risks and opportunities disclosure.

Every year, SIBUR discloses detailed information on its climate change performance and action. Targets for reducing GHG emissions are part of the Company's sustainable development strategy, which is mandatory for the management under its performance assessment metrics.

Maxim Remchukov, Head of SIBUR’s Sustainable Development said: “CDP score is one of the most recognisable in the wide range of international and Russian ESG ratings. It covers all aspects of companies’ efforts to reduce GHG emissions. Climate change has recently come to the fore of the ESG agenda: legislative requirements are being tightened both in and outside Russia, and there is a clear focus on identifying and implementing best practices in climate action. We are already seeing change as in 2021 global players have improved their positions in climate rankings thus raising the respective average scores internationally and industry-wide. The B score retained by SIBUR indicates that we keep marching forward, but to move one step further and get on the A List, SIBUR has to reach the ambitious climate change mitigation targets outlined in our updated Sustainable Development Strategy.”

As MRC reported earlier, SIBUR and Sinopec closed the deal to create a JV based on Amur GCC in late December 2020. As a result of the deal, the parties obtained joint control over the JV in shares of 60% and 40%, respectively.

SIBUR is implementing an Amur GCC project for processing ethane fraction and liquefied petroleum gases (LPG) at Gazprom's Amur GPP.

The capacity of the Amur GCC, as the future world's largest complex for the production of base polymers, will be 2.7 mln tons per year: 2.3 ml tons of polyethylene (PE) and 400,000 tons of polypropylene (PP). The complex's products will be represented by a wide range of grades. The construction of the complex is synchronized with the gradual reaching full capacity of Gazprom's Amur GPP. The approximate time frame for completion of construction and commissioning is 2024.

According to MRC's ScanPlast report, Russia's estimated PE consumption totalled 1,868,160 tonnes in the first nine months of 2021, up by 18% year on year. Shipments of all grades of ethylene polymers increased. At the same time, PP shipments to the Russian market were 1,138,510 tonnes in the first nine months of 2021, up by 30% year on year. Supply of propylene homopolymer (homopolymer PP) and block-copolymers of propylene (PP block copolymers) increased, whereas supply of injection moulding PP random copolymers decreased significantly.

SIBUR Holding is the leader in the Russian petrochemical industry and one of the largest global companies in the sector with over 23,000 employees. Over the past 10 years, SIBUR has implemented a number of large-scale investment projects worth about Rb1 trillion.
MRC