SIBUR continues unification of PP grading codes

MOSCOW (MRC) -- As part of its efforts to unify polypropylene grading codes, SIBUR has introduced a new component that will indicate each product’s production plant of origin, reported SIBUR on its site.

For example, in the grading code PP H030GP/1, PP indicates the polymer type (PP – polypropylene) and H, its class (H – homopolymer); the digits show the target melt flow rate (MFR) times ten, the GP letters after the digits designate the product’s use or processing methods (in this case, GP stands for general purpose), and digit 1 indicates the production plant – Tomskneftekhim.

For polypropylene grading codes produced by NPP Neftekhimiya, a joint venture of Gazprom Neft Moscow Refinery and SIBUR Holding, the digit 2 is used.

NPP Neftekhimiya has been using the new coding standard since March 2013 and Tomskneftekhim switched over to the universal grading codes in 2011. Once commissioned, the new Tobolsk-Polymer facility will also use this coding standard.

The new codes are more informative as they indicate the polymer’s type, use and MFR, making it easier for consumers to choose the grade they need while giving them a better understanding of the company’s grade range. In addition, the code’s new component will instantly indicate which production facility the product comes from.

We remind that, as MRC informed previously, in May 2013, SIBUR began integrated equipment testing at the propylene storage facility and trial production of the first polypropylene line at the company’s Tobolsk-Polymer complex. This follows testing of the first production line at the extrusion plant and the polypropylene packaging and dispatch plant. Over the course of the next few months SIBUR will continue commissioning operations across all production facilities and expects to begin production at the complex by the end of 2013, once all approvals have been granted.

SIBUR is a uniquely positioned vertically integrated gas processing and petrochemicals company. SIBUR owns and operates Russia’s largest gas processing business in terms of associated petroleum gas processing volumes, and is a leader in the Russian petrochemicals industry. As well as thermoplastic elastomers for the road construction sector, SIBUR also produces polymer-modified geosynthetics. Use of these materials extend the time between repairs and equalise the loading intensity and prevent ruts and potholes. These materials also serve a variety of purposes such as reinforcement, separation, filtration, drainage, protection, and water proofing of pavement layers.
MRC

MOSCOW (MRC) -- Gazprom neftekhim Salavat, one of the leading Russian petrochemical producers, will shut down its main units, including polyethylene (PE) plant, for maintenance, said MRC analysts.

Yesterday, on 16 July, Gazprom neftekhim Salavat began a gradual shutdown of its main facilities for a turnaround. The high density polyethylene (HDPE) and low density polyethylene (LDPE) plants with the capacity of 45,000 and 120,000 tonnes per year, respectively, will stop their production today-tomorrow. The maintenance works will last 30 days.

The outage at Salavat PE plants is the first one in a series of scheduled shutdowns for maintenance at Russian plants. Tomorrow, on 18 July, Tomskneftekhim (part of SIBUR) will stop its LDPE production for a scheduled maintenance till 9 August. The annual LDPE production capacity of Tomsk plant is 240,000 tonnes.

Angarsk polymer plant will stop its LDPE production for a planned maintenance by the end of the month. The maintenance works will last 50 days. The resumption of production is scheduled for the second decade of August. The Angarsk plymer plant's annual LDPE capacity is 76,000 tonnes.
MRC

MOSCOW (MRC) -- Unipetrol AS, a Czech chemicals company majority owned by Poland's PKN Orlen SA, Tuesday said it is shutting down for unplanned repairs at its petrochemical steam cracker due to a crack in a pipe causing a steam leakage, according to 4-traders.

The shutdown starts on July 16 and repairs will take about 13 days, the company said in a statement.

The closure may trigger the closure of some refinery units and will also temporarily halt output at its polypropylene unit, the company said.

Unipetrol said it is estimating that the shutdown and repairs to have approximately 50 million koruna (USD2.5 million) in total negative impact on the company's full-year earnings before interest and taxes, EBIT.

We remind that, as MRC reported previously, in early June the company already shut down its ammonia production due to severe flooding in Europe.

Poland’s PKN Orlen oil and petrochemical group holds a 63% stake in Unipetrol.
MRC

MOSCOW (MRC) -- Lanxess' largest production line for the Keltan-branded EPDM synthetic rubber in Sittard, Geleen, The Netherlands, has been successfully converted to the company’s innovative ACE technology, reported the company on its site.

"This is another important step into an even more sustainable future with Lanxess," said Torsten Derr, Head of Lanxess’ business unit Keltan Elastomers (KEL). "We have also completed this conversion on time and in budget."

The German pioneer in synthetic rubbers development has invested roughly EUR12 million to convert the production line from conventional Ziegler-Natta chemistry to its innovative ACE-process. The new line - EPT 3 - has a capacity of 95,000 metric tons per year. This is more than half of the total capacity at that plant. It is currently the world’s largest metallocene ethylene propylene diene monomer (EPDM) plant with an annual capacity of 180,000 metric tons.

"This launch is the result of considerable long term R&D efforts conducted by the EPDM-experts at today‘s Lanxess Business Unit Keltan Elastomers," explained Derr.

The ACE process, utilizing outstandingly active catalysts, enables LANXESS to deliver an extraordinarily broad range of proven, high-quality EPM and EPDM grades - in consistent quality, chlorine-free and with high degrees of purity. Above that, the process consumes less energy and produces no catalyst waste, what makes a deashing step obsolete.

Lanxess’ current range of EPDM rubbers already comprises seven ACE-grades: "The introduction of these grades from the EPT-3 line is the result of an extensive technology and product validation including several test runs on one of the smaller production lines at the Geleen site," said Derr. Validation samples of the new ACE grades were tested during a one year period in the market before the start up of the new production line. ACE grades are already being sold to customers.

EPDM is used above all in the automotive industry for door sealants or coolant hoses.

And the ACE story will be going global soon: "Our Changzhou plant in Jiangsu Province, China, starting up in 2015, will also work with ACE-technology. We are prepared to lead EPDM into a bright future," said Derr.

The plant will have a capacity of 160,000 metric tons per year and represents an investment of EUR235 million, the largest capex project the company has made in China to date.

We remind that, as MRC reported earlier, Lanxess had broken ground for its new neodymium-based performance butadiene rubber (Nd-PBR) plant in Singapore. The German specialty chemicals company is investing roughly EUR200 million in a 140,000 metric tons per annum facility on Jurong Island.

LANXESS is a leading specialty chemicals company with sales of EUR9.1 billion in 2012. The company is currently represented at 50 production sites worldwide. The core business of Lanxess is the development, manufacturing and marketing of plastics, rubber, intermediates and specialty chemicals. Lanxess' first-quarter sales were down by 12% year-on-year to EUR2.1 billion, mainly due to lower volumes and fallen selling prices.
MRC

MOSCOW (MRC) -- Rolta India has announced that it has been awarded a multimillion USD contract from Sadara Chemical Company (Sadara) to implement a comprehensive engineering system at its complex which will be the world’s largest petrochemical facility ever built in a single phase, reported Rolta India on its site.

Value of the contract has not been disclosed. Rolta was selected for this challenging project based upon its unique combination of world class capabilities in Engineering and IT. The project will be managed by a global Rolta team working out of the United States, India and Saudi Arabia, and will be completed by late 2014.

Sadara represents a unique alliance between the Saudi Arabian Oil Company (Saudi Aramco), one of the leading
energy suppliers to the world, and The Dow Chemical Company (Dow), a leading science and technology
company of the world, with a total investment of about USD20 billion.

Rolta will provide an extensive suite of engineering solutions which will support process engineering,
technical support, process automation and control, asset integrity, analytical lab and standards, and
document management.

"A successful implementation of the engineering system is vital to the support and efficient operation of the
Sadara Complex," said Taher Nemer, Project Manager Manufacturing & Engineering Systems, Sadara
Project.

As MRC informed previously, in March 2013, petrochemical company Sadara contracted Intertec to protect around 1,000 field-based process analysers at its new complex in Saudi Arabia. Besides, last year Sadara awarded Tecnicas Reunidas (TR) the Chem-III project, contract for part of the chemical complex being built in Jubail Industrial City II, Saudi Arabia. The project includes the ethylene oxide, propylene glycol, polyols, ethanol amines, ethylene amines, butyl glycol ether plants and the auxiliary and control facilities necessary for their operation.

Rolta is a leading provider of innovative IT solutions for many vertical segments, including Federal and State Governments, Defense/HLS, Utilities, Process, Power, Financial Services, Manufacturing, Retail, and Healthcare. By uniquely combining its expertise in the IT, Engineering and Geospatial domains, Rolta develops exceptional solutions
for these segments.

The Sadara complex, which will have 26 manufacturing facilities, is claimed to be the world's largest petrochemical facility ever built in a single phase and will manufacture more than three million tonnes of chemical and plastics products. The complex is expected to serve the emerging markets of Asia Pacific, the Middle East, Eastern Europe and Africa. The joint venture between Saudi Aramco and The Dow Chemical Company Sadara Chemical Company will build, own and operate an integrated chemicals complex in Jubail Industrial City II, Saudi Arabia. It will produce ethylene, propylene, polyethylene, low density polyethylene, elastomers, amines, propylene glycol, polyether polyols and isocyanates.
MRC